Topic: 1-wire support for Edimax BR-6104K (should work with other routers).

The content of this topic has been archived on 1 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

bifferos

4 Mar 2008, 16:58

Some basic instructions here:
http://squidge.sourceforge.net/w1/

Working patch that recognises devices on the bus here:
http://squidge.svn.sourceforge.net/view … iew=markup

Note that this should work with any router using GPIO with a 2.6 kernel, because nothing is specific to adm5120, although the patch drops the files in the adm5120 target area.

The discussion might have continued from here.

Page 1 of 1