OpenWrt Forum Archive

Topic: Will Westell A90-9100EM15-10 work ?

The content of this topic has been archived on 30 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
munchmantx
19 Dec 2008, 17:18

Hello,

I have put openwrt/xwrt on about 6 wrt65g routers over the years for friends, family, and customers.

One of my customers recently ordered FiOS from the local telco and the technician installed a Westell 9100 EM router. It has a USB port on it that I would very much like to use as a print server or a connection for external storage. However, this manufacturer (not to mention model) is not on the Table of Hardware page.

I would like to know if anyone can comment of whether this *should* work with openwrt and if so, is there anything special to watch out for?

Here is the info page from Westell (and they *do* have an open source section)
http://www.westell.com/index.php?option … on=support

Thanks!
Jeromey

Post #2
Kaloz
4 Jan 2009, 15:20

Seems to be Infineon Twinpass from the tarball.. The ifxmips target could run on it with some work.

Post #3
boytroy88
19 Feb 2009, 22:41

Tried compiling *their* source but am getting errno: 127.  Anyone else try???

The discussion might have continued from here.