OpenWrt Forum Archive

Topic: Board with USB and 2 Ethernet

The content of this topic has been archived on 3 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi all,
actually I'm developing a solution with NSLU2 and a USB UMTS Modem (I'm try to post all developing step to www.farlock.org -less of time sad ).
Now i've to add a second ethernet and probably wireless, so I'm looking for a board or an already commercialized product (such wrtsl54gs) that has this features:
- Two Ethernet LAN (at least)
- USB Port (at least one)
- If possible integrated wireless.

No matter of vendor, ecc.
Thanks to anyone could help me!

Denis

sette wrote:

- Two Ethernet LAN (at least)
- USB Port (at least one)
- If possible integrated wireless.

Hi,

I think that Asus's WL500gP will fit your needs - this little machine sports 5 ethernet ports, two USB 2.0 ports and has wireless adapter (v1 has MiniPCI card, v2 has integrated radio). The RAM is 32MB, Flash - 8MB.

Cheers,
zdravko

Hi,

You can also have a look at Omnima Embedded Controller for a cost-effective solution including all the required programming tools, EMBDev VM development environment, GPIOs for interfacing to additional hardware, etc.

Dean

The discussion might have continued from here.