Hi all.

Reading some of the posts on Hackaday it seems that the earlier (WAGx34) Netgear routers can be hacked to control servos.

My ideas is to use a pair of model aircraft servos and a PIC so that upon receiving a ping on a certain port the router flashes a spare LED pair  (i.e. unused network *3 and *4) with a pair of ping length determined pulse widths that then tell the PIC to move the servos to the location specified.

Problem is the "donor" router got bricked by a failed attempt at flash upgrading via wifi.

I've purchased another and managed to JTAG its old firmware across but it won't flash a single byte yet it reads OK.

Any ideas? Am using STJTAG

Have the original firmware on here www.cwgsy.net/private/mandoline/DG834GV4.zip.zip

regards, -A

(Last edited by conundrum1066 on 2 Apr 2009, 13:00)