OpenWrt Forum Archive

Topic: Router status on radius.

The content of this topic has been archived on 13 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hello guys.

I have 6 routers with 10.03 rc6 wornking on it.

All the routers are working with PPPoE. For the wifi authentification I´m using FreeRadius.

I setup the routers to send an accounting_interim every 60 seconds, as a "keep_alive". I know if the router is working an how much traffic is producing each client.

If there is no client connected to the router, I don´t recieve any accounting data. I would like to router to send itself any keep_alive messages to the radius.
Any, Ideas?


Thanks, Toni

The discussion might have continued from here.