Using MAC80211 and ath9k for AP, while doing authentication with WEP and shared key Authentication, the first two message have been communicated. The third message is also send by station and visible in the air. But the frame is not received at User space. The registration for authentication frame is successful, as first frame of authentication is received. The shared key is also set in the driver. What is the settings required to receive the third frame ?
Topic: ath 9K WEP shared key
The content of this topic has been archived on 26 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1