OpenWrt Forum Archive

Topic: Mikrotik HEX Lite RB750 QCA-9531-BL3A

The content of this topic has been archived on 17 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
kumarvikas0
1 Jun 2015, 03:35

Hi Friends,

is their any precompiled image available for Mikrotik New RB750r2 with QCA9531-BL3A based SOC board.

Thanks

Post #2
sidepipe
1 Jun 2015, 07:48

No... as far as I'm aware there isn't support for this yet. It's very similar hardware wise to the TP-Link TL-WR841ND v9 and as such I've got the Ethernet working and the flash is visible, so it's possible to netboot ( but there are no pre-compiled images. ) It needs someone who knows how these devices boot so that OpenWRT can be installed in flash to replace RouterOS.

It may also be possible to use metarouter ( not sure if it's actually supported on those boxes ) but if so it would have to be a small image.

The discussion might have continued from here.