Hi,

i try to install the x86 version of openwrt., to use on a PC.
I have some trouble and would like go post some question.

Here is my config :
Pc with asus motherboard,  p5lp-le.
4 gb or ram
Intel dual core 4500
Ethernet on board : not sure.  May be trough the intel 945g
Pci ethernet dlink dge 528t
Hard drive sata 500gb
Usb port

For my test,  i want to be connected to my adsl provider adsl box,  which do not do bridge. 
I expect to parameter some dmz connection or something like that. 
If it works,  i will buy a modem,  with bridge feature

Question 1
I create a disk with that image :
http://downloads.openwrt.org/chaos_calm … 6/generic/
I used a mac to create the disk,  so i use the console app :
Ex.  dd if=openwrt-x86-2.6-ext2.image of=/dev/sda

I did that on a usb stick,  and on my sata disk
Same result when i boot :
I am stuck at a line like :
Br-lan: port 1(eth0) entered forwarding state
Random nonblocking pool is initialied
And i never have a linux login
I believe tbzt it is not normal ?

Note : several linux distrib recognize my 2 ethernet card.  Mikrotik routeros recognize the 2 czrd ( but i can't make it works also :-(

Question 2
Can i use openwrt connected to a modem/router,  trough a dmz,  during my test ?

question3
is there any tuto which could help me ?
i don't find any simple tuto...

thanks for any advice
olivier