The content of this topic has been archived on 23 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
ok, I have Thompson router, I have soldered wires on the serial connectors.
I now want to connect to an RJ45 female socket, and connect to my PCs serial using a Cisco rollover cable.
Is anyone able know which pin numbers I need to link the wires to on my RJ45 socket please?
Thanks in advance
Jamie
Hi, http://www.cisco.com/c/en/us/td/docs/se … inouts.pdf
or https://www.google.fi/search?q=cisco+pi … sgHR0pnAAw
Are you sure that you soldered to Serial pins not to UART? They means same, but different voltage level. I think you need to use UART serial converter.
The discussion might have continued from here.