Hi all
I need a help with find a GPIO pins on board. I was check all SMD compoents on PCB and i did't find solution :<
I use this article : https://wiki.openwrt.org/doc/hardware/port.gpio
(Last edited by mcz on 13 Feb 2016, 20:08)
Topic: GPIO in D-link DIR-300 B1
The content of this topic has been archived on 7 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
I think you want gpio for MMC/SD modding. Try this manual: https://docs.google.com/document/d/1X3R … sEdA/edit#
Nope, i want connect 2x16 LCD display do my router :< And i have got diffrent PCB, where i can't find any GPIO :<
The discussion might have continued from here.
Page 1 of 1