I have this at home, is it possible to unbrick my WT1520 using it? If so, how?
Topic: Can I unbrick my WT1520 using this cable?
The content of this topic has been archived on 23 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
vinsexi wrote:
I have this at home, is it possible to unbrick my WT1520 using it? If so, how?
it's just an image of a cable with usb and 4 wires, how do you think we can recognize will it work or no?
Please provide the model of a cable, or the board photo, or the VID/PID of the device after connecting it to pc, or the main chip name or model, something can be used to recognize it.
(Last edited by stas2z on 23 Feb 2016, 17:54)
PID/VID is useless.
Check for 3.3V TX/RX Lines, which most routers have.
Do never connect 'red wire, which is 5V and damage your board.
stas2z wrote:
vinsexi wrote:
I have this at home, is it possible to unbrick my WT1520 using it? If so, how?
it's just an image of a cable with usb and 4 wires, how do you think we can recognize will it work or no?
Please provide the model of a cable, or the board photo, or the VID/PID of the device after connecting it to pc, or the main chip name or model, something can be used to recognize it.
https://www.adafruit.com/products/954
This is the cable I bought, as far as I know it have TX/RX
The discussion might have continued from here.
Page 1 of 1