Topic: tp-Link 1043nd V2.1 CC 15.05 (HT40 and n wifi problem)

The content of this topic has been archived on 17 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

Gre@T

8 Mar 2016, 09:47

Hello,

I have a Tp-Link 1043nd V2.1 with 15.05 CC. It is impossible to set to HT40 and "n" mode.
Does the QCA9558 chipset supported?

Here is the part of my wifi config:
wireless.radio0.hwmode='11g'
wireless.radio0.noscan='1'
wireless.radio0.require_mode='n'

The maximum speed is 90Mps only with this setting.

Thanks,

The discussion might have continued from here.

Page 1 of 1