OpenWrt Forum Archive

Topic: davidc502 1900ac 3200acm builds

The content of this topic has been archived between 26 Feb 2018 and 7 May 2018. Unfortunately there are posts – most likely complete pages – missing.

Does someone know if i can import wrt1900acs settings in wrt3200 without problems? (backup/import)

Hi,

Can some one help me w/ log errs msg?

Thanks


Fri May  4 04:49:02 2018 daemon.info pppd[26934]: LCP terminated by peer
Fri May  4 04:49:02 2018 daemon.info pppd[26934]: Connect time 118.4 minutes.
Fri May  4 04:49:02 2018 daemon.info pppd[26934]: Sent 84220 bytes, received 776537 bytes.
Fri May  4 04:49:02 2018 daemon.err odhcp6c[27149]: Failed to send RS (Permission denied)
Fri May  4 04:49:02 2018 daemon.err odhcp6c[27149]: Failed to send DHCPV6 message to ff02::1:2 (Permission denied)
Fri May  4 04:49:02 2018 daemon.notice netifd: Network device 'pppoe-wan' link is down
Fri May  4 04:49:02 2018 daemon.notice netifd: Network alias 'pppoe-wan' link is down
Fri May  4 04:49:02 2018 daemon.notice netifd: Interface 'wan_6' has link connectivity loss
Fri May  4 04:49:02 2018 daemon.notice pppd[26934]: Modem hangup
Fri May  4 04:49:02 2018 daemon.notice pppd[26934]: Connection terminated.
Fri May  4 04:49:02 2018 daemon.info pppd[26934]: Connect time 118.4 minutes.
Fri May  4 04:49:02 2018 daemon.info pppd[26934]: Sent 84220 bytes, received 776537 bytes.
Fri May  4 04:49:02 2018 daemon.notice netifd: Interface 'wan_6' is disabled
Fri May  4 04:49:02 2018 daemon.notice netifd: Interface 'wan' has lost the connection
Fri May  4 04:49:02 2018 daemon.notice netifd: wan_6 (27149): Command failed: Permission denied
Fri May  4 04:49:03 2018 daemon.info pppd[26934]: Sent PADT
Fri May  4 04:49:03 2018 daemon.info pppd[26934]: Exit.
Fri May  4 04:49:03 2018 daemon.notice netifd: Interface 'wan' is now down
Fri May  4 04:49:03 2018 daemon.notice netifd: Interface 'wan' is setting up now
Fri May  4 04:49:03 2018 daemon.err insmod: module is already loaded - slhc
Fri May  4 04:49:03 2018 daemon.err insmod: module is already loaded - ppp_generic
Fri May  4 04:49:03 2018 daemon.err insmod: module is already loaded - pppox
Fri May  4 04:49:03 2018 daemon.err insmod: module is already loaded - pppoe
Fri May  4 04:49:03 2018 daemon.info pppd[28561]: Plugin rp-pppoe.so loaded.
Fri May  4 04:49:03 2018 daemon.info pppd[28561]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Fri May  4 04:49:03 2018 daemon.err odhcp6c[27149]: Failed to send DHCPV6 message to ff02::1:2 (Permission denied)
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: pppd 2.4.7 started by root, uid 0
Fri May  4 04:49:03 2018 daemon.info pppd[28561]: PPP session is 1
Fri May  4 04:49:03 2018 daemon.warn pppd[28561]: Connected to 00:d0:f6:81:fd:33 via interface eth1.2
Fri May  4 04:49:03 2018 kern.info kernel: [28151.389316] pppoe-wan: renamed from ppp0
Fri May  4 04:49:03 2018 daemon.info pppd[28561]: Using interface pppoe-wan
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: Connect: pppoe-wan <--> eth1.2
Fri May  4 04:49:03 2018 daemon.info pppd[28561]: Remote message: Login ok
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: PAP authentication succeeded
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: peer from calling number 00:D0:F6:81:FD:33 authorized
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: local  LL address fe80::f56a:8363:a96c:2cbd
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: remote LL address fe80::e681:84ff:fe30:300f
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: local  IP address XXX.185.44.XXX
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: remote IP address XXX.184.126.XXX
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: primary   DNS address XXX.175.5.XXX
Fri May  4 04:49:03 2018 daemon.notice pppd[28561]: secondary DNS address 200.175.182.139
Fri May  4 04:49:03 2018 daemon.notice netifd: Network device 'pppoe-wan' link is up
Fri May  4 04:49:03 2018 daemon.notice netifd: Interface 'wan_6' is enabled
Fri May  4 04:49:03 2018 daemon.notice netifd: Network alias 'pppoe-wan' link is up
Fri May  4 04:49:03 2018 daemon.notice netifd: Interface 'wan_6' has link connectivity
Fri May  4 04:49:03 2018 daemon.notice netifd: Interface 'wan_6' is setting up now
Fri May  4 04:49:03 2018 daemon.notice netifd: Interface 'wan' is now up
Fri May  4 04:49:03 2018 user.notice firewall: Reloading firewall due to ifup of wan (pppoe-wan)
Fri May  4 04:49:03 2018 daemon.err odhcp6c[28774]: Failed to send DHCPV6 message to ff02::1:2 (Operation not permitted)
Fri May  4 04:49:04 2018 user.notice firewall: Reloading firewall due to ifupdate of wan (pppoe-wan)
Fri May  4 04:49:04 2018 user.warn igmpproxy[27292]: select() failure; Errno(4): Interrupted system call
Fri May  4 04:49:04 2018 user.warn igmpproxy[27292]: MRT_DEL_MFC; Errno(2): No such file or directory
Fri May  4 04:49:04 2018 authpriv.info dropbear[27260]: Early exit: Terminated by signal
Fri May  4 04:49:04 2018 authpriv.warn dropbear[29024]: Failed listening on '6529': Error listening: Invalid argument
Fri May  4 04:49:04 2018 authpriv.info dropbear[29024]: Not backgrounding
Keltere wrote:

Does someone know if i can import wrt1900acs settings in wrt3200 without problems? (backup/import)

Yes you can..  I don't expect there will be a problem for you.

oldchip wrote:

The recent David's rom had no tvheadend package. I've tried to install this package from older david's sourse and openwrt but not success. Where can i find tvheadend.ipk. Thanks for all

Take a look at the daily snapshot builds in OpenWrt... However, I think there has already been a kernel bump, so if that is the case then it won't install.

davidc502 wrote:
Keltere wrote:

Does someone know if i can import wrt1900acs settings in wrt3200 without problems? (backup/import)

Yes you can..  I don't expect there will be a problem for you.

Really thanks for everything. This is the best Firmware for routers ever.

One question, it's just a placebo effect or through Openvpn i get more bandwith? Maybe because of compression?

Keltere wrote:
davidc502 wrote:
Keltere wrote:

Does someone know if i can import wrt1900acs settings in wrt3200 without problems? (backup/import)

Yes you can..  I don't expect there will be a problem for you.

Really thanks for everything. This is the best Firmware for routers ever.

One question, it's just a placebo effect or through Openvpn i get more bandwith? Maybe because of compression?

Openvpn compared to not being on VPN?  Usually being on VPN can create a choke point depending on how busy the VPN server is. Also, all packets are encrypted/decrypted which can take extra cpu cycles (depending) as well as the vpn protocol over-head.

(Last edited by davidc502 on 4 May 2018, 19:01)

@davidc502

Compiling for the WRT3200ACM with neon optimizations works. There are performance benefits, but they are rather small... More info and bench results here: github .com /lede-project/source/pull/1211 (can't post links yet...)

(Last edited by Vindicator on 4 May 2018, 22:23)

@davidc502

Finally managed to complete the compile from source without error....  but no. img is generated, /source/bin/targets/mvebu/generic contains no .img

I only added luci app commands and vsftpd so I don't think its refusing to generate because the resulting image would be too big for device...  could it be because I disabled dhcpv6 and dnsmasqv6 in base system? Anyways, re-compiling now with these two options enabled.

(Last edited by Cantenna on 4 May 2018, 23:10)

Vindicator wrote:

@davidc502

Compiling for the WRT3200ACM with neon optimizations works. There are performance benefits, but they are rather small... More info and bench results here: github .com /lede-project/source/pull/1211 (can't post links yet...)

It's very interesting Vindicator.
Since I'm using ffmpeg to transcode in real time audio from mp2 to mp3. Can I ask you if NEON extensions could be used to let me transcode video too from mpeg2 to H264 using HW acceleration?

Also any idea how I can only compile ffmpeg-full package using --enable-libshine directive (it's a mp3 encoder optimized for arm chipsets) without compile the whole image?

Thanks.

The discussion might have continued from here.