Dear all,

I would like to introduce the Compex OpenWRT & Redboot /Snapgear Wireless AP Board.
Our manufacturing Wireless AP Board come with the CPU Infineon ADM5120 Processor operating at 175MHz Speed with OpenWRT loaded inside the Board.
The P-WR-WP54AG Dev Kit is the complete OpenWRT development solution.
Kindly view the website below to get the OpenWRT board and more details and source code :

http://www.compex.com.sg/home/OEM/Open_wrt.htm

Who is interested to buy our OpenWRT board Complete Development kit Solution, pls contact me.
I will provide the best price for you.

Thanks.

Michael Tan
COMPEX SYSTEMS PTE LTD
135 Joo Seng Road #08-01 PM Industrial Building Singapore 368363
Tel: (65) 6381 0150
Mobile No:(65)94600167
Fax: (65) 6280 9947
MSN Messenger: weisiong84@hotmail.com
Email: michael_tan@compex.com.sg
Website: http://www.compex.com.sg/home/download.asp?DL1=Wireless
http://www.compex.com.sg/home/OEM/mini_pci.htm

Dear Michael Tan

I want openwrt porting NP28G.

Thanks.

The router NP28G does not have the OpenWRT. The Compex WRAP Board WP54 is able to support the OpenWRT. It comes with the OpenWRT loaded inside the Board. You can simply customize your AP easily by using the WP54 Board Solution.

Pls look at the website below for more details about our Compex WP54-WRT :

http://wiki.openwrt.org/OpenWrtDocs/Har … mpex/WP54G

Dear all,

The specification for Compex OpenWRT Board model :P-WR-WP54 Board is shown below. We will offer the lowest price in the market with similar spec.

-CPU Infineon ADM5120
-16MB SDRAM
-4MB Flash
-Support any IEEE 802.3af Standard POE(15W) or Compex Passive POE,
-2 x 10/100Mbps Ethernet Port(Lan/Wan)
-1 MiniPCI (802.11a/b/g or b/g)Slot.                                                                       
-Loaded with Open-WRT, CPLD added

The P-WR-WP54AG WRT Development Kit is included with the following :

1 x P-WR-WP54 Board(With Open-WRT, CPLD Added) Board
1 x Atheros MiniPCI a/b/g,
1 x JTAG Programmer(Cable from PC to JTAG Programmer included)
1x Serial Converter(Cable from PC to Serial Converter included)                                                                     
1 x Power Adapter                                                                                     
1 x Standard 802.3af Compliance POE(15V)               
Download Open-WRT Source codes and Stuff needed for JTAG Programmer from Compex Website below. You can get the hardware manual and datasheet from there also.

The price is advisable upon request.

http://www.compex.com.sg/home/OEM/Open_wrt.htm

Pls feel free to contact me at michael_tan@compex.com.sg

Thanks You and Best Regards,
Michael Tan
COMPEX SYSTEMS PTE LTD
135 Joo Seng Road #08-01 PM Industrial Building Singapore 368363
Tel: (65) 6381 0150
Mobile No:(65)94600167
Fax: (65) 6280 9947
MSN Messenger: weisiong84@hotmail.com
Email: michael_tan@compex.com.sg
Website: http://www.compex.com.sg/home/download.asp?DL1=Wireless
http://www.compex.com.sg/home/OEM/product_ap.htm

(Last edited by michaeltan84 on 26 Mar 2007, 04:26)

Dear all,

You just need to get one of our development kit model : P-WR-WP54AG WRT Development Kit, then do your own testing for OpenWRT.
if the testing has successfully, you can decide whether you want to buy our OpenWRT Board model : P-WR-WP54 Board.

You just need to buy one of the development kit from us, then you can use it in thousand pcs of the OpenWRT Board model : P-WR-WP54 Board and build your own Access Point or put your brand inside as you like. The price shown above.

We are also doing the hardware customization for the AP, it is optional.

Have a good view here :

http://www.compex.com.sg/home/OEM/Open_wrt.htm

Dear All,

Thanks for your supporting our Compex OpenWRT Development Kit.
I have recieved many order from you all.

If you have any technical question or problem when using our Compex OpenWRT Development Kit, pls feel free to contact us.

We will provide the answer for you and solve your problem immediately.

Pls feel free to contact me at michael_tan@compex.com.sg

Thanks You

Best Regards,
Michael Tan
COMPEX SYSTEMS PTE LTD
135 Joo Seng Road #08-01 PM Industrial Building Singapore 368363
Tel: (65) 6381 0150
Mobile No:(65)94600167
Fax: (65) 6280 9947
MSN Messenger: weisiong84@hotmail.com
Email: michael_tan@compex.com.sg
Website: http://www.compex.com.sg/home/download.asp?DL1=Wireless
http://www.compex.com.sg/home/OEM/product_ap.htm

Question: can the WP-WRT run OpenWrt Kamikaze yet, by which I mean built only from source in OpenWrt's own source repository?

Compex's released source code appears to be a fork from an old version of OpenWrt (April 2006). If that's the case, anyone using this as their base would lose any improvements and bug fixes made by the OpenWrt developers since that date.

Thanks,

Brian.

Hi, Brian,

The most probably that our Compex OpenWRT Board can run the Kamikaze inside. You can try it out.

The released source code is changed everyday. You can easily upgrade the new version yourself. You can get the new update source code through online easily since it is open source.

If you are the OpenWRT hobbists, you should not have problem for the upgrading part. You can play around the product and put in the new source code everyday.
Perhaps , it is very easy for you.

Mike.

Maybe, but it's still not OpenWrt. That's where the confusion arises.

On the other hand, if WP54-WRT does run genuine OpenWrt, then there shouldn't be any need for you to release your own separate code tree.

It's not much of an issue while Kamikaze is just a testbed for developers, but once there is a production/stable release of Kamikaze, it will be the difference between people being able to run "official" released OpenWrt binaries or not.

The Compex WP54-WRT Development Kit is suitable for those who like to try and experienced the powerful of the OpenWRT devices. If you not like to try and explore the new thing inside our openwrt device, i think you wont like the device. Since it is open source,you can simply update,debug and modify our default source code version urself to meet your own requirement. It is easy and flexible!

Our OpenWRT source code(April 2006) is only work as a example to show how easily OpenWRT can be made to run on our OpenWRT Board.

Mike.

Mike.

New update.

FYI

Compex  WP18 is support Kamikaze,

take a look at

http://wiki.openwrt.org/OpenWrtDocs/Hardware/Compex

(Last edited by DD7 on 20 Apr 2007, 03:55)

WP54-WRT just supports Kamikaze and not WhiteRussian, does it not?

The status of WP54 is still "Forked" refer to below,

Forked - Vendor has released some source based on an older snapshot of OpenWrt, but it has not been merged back into the main OpenWrt source tree,

Mean Compex provide its own OpenWRT  not the Kamikaze, but i beliv it is soon will support kamikaze and merge back into the main one.

Info
http://wiki.openwrt.org/OpenWrtDocs/Har … pex/WP546E

Compex WP18 is the one that support kamikaze, not WP54.

link http://wiki.openwrt.org/OpenWrtDocs/Har … ompex/WP18

I saw from the website WP188 is out with 4 MiniPCI.

Is it support OpenWRT as well ?

Any other Firmware does this boardd Support ?

Please give me some information about this board. I have a big interest with this board.
Datasheet and harware manual will be good . I cant find about this board in internet yet.

I tried your WP18 it work fine n great.

Yes, the Compex WP188 Board( http://www.compex.com.sg/home/OEM/product_ap.htm ) also support OpenWRT. It support kernel v2.6 and kamikaze 7.07 too.

You can download the latest datasheet and hardware manual and openwrt codes for WP188 board through the website below :

http://www.compex.com.sg/home/OEM/Open_wrt.htm

Feel free to contact me at michael_tan@compex.com.sg

Best Regards,

Mike.

I f you are interested on wp188 see my posts:  Openwrt on compex Wp188 instead of Wp18

I Have problems with minipci wireless boards on wp188:

/lib/modules/2.6.21.5 # lsmod                                                   
Module                  Size  Used by                                           
ath_rate_minstrel 6848 0 - Live 0xbf06d000                                     
ath_pci 65956 0 - Live 0xbf05b000                                               
ath_hal 241240 2 ath_rate_minstrel,ath_pci, Live 0xbf01f000 (P)                 
wlan 121132 2 ath_rate_minstrel,ath_pci, Live 0xbf000000                       
/lib/modules/2.6.21.5 # iwconfig wlan0                                         
wlan0     No such device                                                       
                                                                               
/lib/modules/2.6.21.5 # iwconfig                                               
lo        no wireless extensions.                                               
                                                                               
imq0      no wireless extensions.                                               
                                                                               
imq1      no wireless extensions.                                               
                                                                               
eth0      no wireless extensions.                                               
                                                                               
eth1      no wireless extensions.                                               
                                                                               
/lib/modules/2.6.21.5 #

Someone can say me why the board don't find the wireless card Atheros WLM54AG connected on the mini.pci slot?
May be a problem on the addressing? strange because the minipci support is embedded in the ixP425, i think.. a bios problem? do i need to load a bios for ath card like i'm loading it for  ethernet boards?

.. i will post the same question also directly to compex support.

Thanks
Enrico Betti.

Enrico, Pls send the email to support@compex.com.sg. They will provide technical solution to you.

Greetings,

I would like to ask if  the C-54PWE Rev A6.1 product supports the latest OpenWRT/Kamikaze. The unit has a MyLoader version 2.32.0515.

>> Someone can say me why the board don't find the wireless card Atheros WLM54AG connected on the mini.pci slot?

May be you need to put the card in the right order, 0, 1 ,2 ,3 

For kamikaze 7.07 it only support board with loader Min V2.43
and from my conversation with the Tech support the loader it is meant for internal use only. So i would like to suggest to you to contact the support and request for the Latest one. However you might need able to identify urself before get the loader file. (Perhaps this is what i did )

I think that you can find the loader V2.43 here :
http://www.cpx.cz/dls/WP54G_linux/OpenWRT_IkarusOS

Edit:
I have upgraded to loader 2.43.0706:

The problem is now that any openwrt img gives me "Bad Firmware format!"
Any ideas? which image file to use? (I am building the svn version)

(Last edited by Slammer on 8 Apr 2008, 21:26)

SUCCESS!!!

I am talking about C-54PWE Rev A6.1  board. (I am confused about naming with Compex WP54 boards...)
My board is this:
http://www.aerial.net/shop/product_info … cts_id=390
or this:
http://shop.antcor.com/shop/product_inf … cts_id=134
or this (???):
http://www.cpx.cz/produkt.php?c=routery&i=87

The board comes with Myloader V2.32 and is preloaded with Ikarus.

The upgrade file to 2.43 is here:
http://www.cpx.cz/dls/WP54AG_linux/OpenWRT_IkarusOS/

After upgrade I downloaded the openwrt-adm5120-wp54ag-jffs2.bin to board.
Now openwrt runs

(The board is now recognized as WP54AG... I dont know if this is correct...)

(Last edited by Slammer on 8 Apr 2008, 22:24)

Correct

is it only me or the following link is not working

http://www.compex.com.sg/home/OEM/Open_wrt.htm

i have to say support from compex is very sloppy and really ire-inducing.