Has anyone got the USB GPS (DeLorme Earthmate LT20) to work successfully on kamikaze (I'm using a wgt634u)?   After much effort I've managed to get the device recognized by loading the cypress_m8.ko module, which presents /dev/ttyUSB0.

Running 'cat /dev/ttyUSB0' just sits there doing nothing.

Running 'gpsd -n -N -D8 /dev/ttyUSB0', produces some output as if gpsd is talking to the device but I don't think
it's actually working.  Output below.   If anybody has a working config, please let me know.

root@OpenWrt:~# gpsd -n -N -D8 /dev/ttyUSB0
gpsd: launching (Version 2.30)
gpsd: listening on port 2947
gpsd: running with effective group ID 0
gpsd: running with effective user ID 0
gpsd: opening GPS data source at '/dev/ttyUSB0'
gpsd: garmin_gps not active.
gpsd: no probe matched...
gpsd: speed 4800, 8N1
gpsd: gpsd_activate: opened GPS (4)
gpsd: flagging descriptor 4 in open_device
gpsd: select waits
gpsd: select waits
gpsd: client connect on 5
gpsd: select waits
gpsd: select waits
gpsd: checking client(5)
gpsd: <= client(5): p
gpsd: client(5): assigning channel...
gpsd: User requires 2, channel type is -1
gpsd: client(5): channel 4 already active.
gpsd: GPS is confused about whether it has a fix (status=0, mode=0).
gpsd: => client(5): GPSD,P=?