Topic: TTY1 on Buffalo WHR-HP-G54 ?

The content of this topic has been archived on 18 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

noisette

11 Apr 2007, 01:54

serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16550A port:B8000300 irq:3 baud:113636 tx:1834 rx:49 brk:8 RTS|CTS|DTR|DSR|CD
1: uart:16550A port:B8000400 irq:0 baud:9615 tx:207 rx:0 CTS|DSR|CD

It looks like the BCM 5352 has 2 serial ports. I already got TTY0 to work, but would like to get to TTY1 if possible... Anybody had any luck finding it on the PCB?

God i would really like to find that BCM5352.PDF ...

The discussion might have continued from here.

Page 1 of 1