OpenWrt Forum Archive

Topic: Init Error

The content of this topic has been archived on 30 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi!

I have a problem ... linux starts, mounts de squashfs filesystem and then wenn calling init it hangs ....

Go to Memory Address: (default:0x80001000) : 0x

LOG wrote:

Are you sure, you have the valid code on 0x80001000 ? (Y/n) Yes

Linux version 2.6.19.2 (openwrt@linuxOne) (gcc version 4.1.2) #81 Sun Apr 22 21:24:23 CEST 2007
CPU revision is: 00019064
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 00c00000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists.  Total pages: 3048
Kernel command line: console=ttyS0,115200 slram=rootfs,0x00e00000,+512k root=/dev/mtdblock0 mem=12M rootfstype=squashfs,jffs2 init=/etc/preinit
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 92.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 9716k/12288k available (1944k kernel code, 2572k reserved, 287k data, 116k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
WARNING: No board configuration data found!
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: -1, 2048 bytes)
TCP bind hash table entries: 256 (order: -2, 1024 bytes)
TCP: Hash tables configured (established 512 bind 256)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
íý!!ý serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A
eth0: Dropping NETIF_F_SG since no checksum feature.
eth0: Atheros AR231x: 00:16:36:04:57:a5, irq 4
Generic platform RAM MTD, (c) 2004 Simtec Electronics
parsing slram<7>slram: devname=rootfs, devstart=0xe00000, devlength=0x80000
slram: Registered device rootfs from 14336KiB to 14848KiB
ip_conntrack version 2.4 (96 buckets, 768 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Time: MIPS clocksource has been installed.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
Warning: unable to open an initial console
Algorithmics/MIPS FPU Emulator v1.5
Ç  ‡  Ç --> here are some strange symbols and then nothing ... it hangs ..

can anybody of you help me???

thx

lumpic wrote:

can anybody of you help me???

No, we cannot help you.

You haven't provided any information about what device you're using or what version of OpenWrt that was.

sorry...

it is an siemens se551 with kamikaze modified for this device....
chipset ar5315

thx

The discussion might have continued from here.