OpenWrt Forum Archive

Topic: port 25 opened

The content of this topic has been archived on 25 Feb 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
tigger
25 May 2007, 08:22

Hi,

I did a port scanning on my Asus WL-500gP and found that port 25 has been opened. However checking with "netstat -an" I did not find any processes listening to port 25. Below the output of netstat. But telnet to 192.168.1.1 (router's IP) on port 25 there is a response. Has someone encountered a similar problem? Thanks for help in advance.

Kind regards,
Tinho

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN
tcp        0     52 192.168.1.1:22          192.168.1.104:1613      ESTABLISHED
netstat: no support for 'AF INET6 (tcp)' on this system
udp        0      0 0.0.0.0:1026            0.0.0.0:*
udp        0      0 0.0.0.0:53              0.0.0.0:*
udp        0      0 0.0.0.0:67              0.0.0.0:*
netstat: no support for 'AF INET6 (udp)' on this system
netstat: no support for 'AF INET6 (raw)' on this system
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags       Type       State         I-Node Path
unix  6      [ ]         DGRAM                    125    /dev/log
unix  2      [ ]         DGRAM                    1993
unix  2      [ ]         DGRAM                    382
unix  2      [ ]         DGRAM                    379
unix  2      [ ]         DGRAM                    128

Post #2
ggp81
28 May 2007, 11:14

If you try to reinstall the firmware it's the same?

The discussion might have continued from here.