OpenWrt Forum Archive

Topic: Installing kamikaze 7.06 on 4G Meshcube

The content of this topic has been archived on 11 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
jpo234
8 Jun 2007, 10:48

Hello all,
I think I have successfully build the current openwrt release for a 4G MeshCube. Unfortunately I'm now at a loss on how to proceed. I have the following images:

openwrt-au1000-2.6-jffs2-128k.fs
openwrt-au1000-2.6-jffs2-128k.img
openwrt-au1000-2.6-jffs2-64k.fs
openwrt-au1000-2.6-jffs2-64k.img
openwrt-au1000-2.6-vmlinux.bin

The *.img files are in SREC format, while the kernel is a binary. According to http://www.meshcube.org/meshwiki/InstallTftp the kernel images should be SREC formatted as well.

So, how do I proceed now that I have the new firmware?
Is the kernel image of the RAM or the Flash variant?

Thanks in advance
  Joerg

Post #2
tom7
31 Dec 2007, 16:09

Hi, could anyone answer this? I'd like to flash my meshcubes with openwrt and I would appreciate some clear instructions. Thanks.

The discussion might have continued from here.