The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
I have WGT634U, and trying to flash the Kamikaze 7.06 image using console cable; from CFE
flash -noheader local-url:openwrt-wgt634u-2.6-squashfs.bin flash0.os
response OK after flash, but when I reboot, it keeps on restarting.
Did I missed anything ?
This was posted at under General, I re-post here to see if it does have a problem with the image. Thanks.
flash it again. I had the same problem and it fixed it... infact now that I think about it, it seems that I have to flash it atleast twice everytime I change the firmware......
The discussion might have continued from here.