When I boot my device with a squashfs root file system. I think it mounts it read only. And when I use "df" it shows I used 100% however I know there is normally some place. Because with jffs I have used 94%. But I would like to move to squash to have some more space left.
Can it be that I have to change the mtd names I'm using?

This is how my image looks like

0x00000000-0x00010000 : "bdata"
0x00010000-0x00050000 : "boot"
0x00050000-0x00100000 : "zImage"
0x00100000-0x003f0000 : "root"
0x003f0000-0x00400000 : "EEPROM"

Here is the df result:

root@(none):/# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/mtdblock5            1664      1664         0 100% /
none                     14936         0     14936   0% /tmp
tmpfs                      512         0       512   0% /dev

Any help would be greatly appreciated.

(Last edited by swinnenb on 26 Jun 2007, 15:30)