OpenWrt Forum Archive

Topic: Kamikaze ipkg upgrade segmentation fault

The content of this topic has been archived on 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
tootai
15 Jul 2007, 10:52

Good morning,

after upgrade from WR0.9 to Kamikaze 7.6 on a WRT54G v2 I get this:

root@wap:~# ipkg update
Downloading http://downloads.openwrt.org/kamikaze/7 … s/Packages
Updated list of available packages in /usr/lib/ipkg/lists/snapshots
Done.

root@wap:~# ipkg upgrade
Upgrading base-files-brcm-2.4 on root from 8-7431 to 8-7485...
Downloading http://downloads.openwrt.org/kamikaze/7 … mipsel.ipk
conffile_has_been_modified: conffile /etc/passwd:
old md5=2d14667e1a5798efe3fa48659313dfb1
new md5=4160554a2386454f331d3ef7124f2281
conffile_has_been_modified: conffile /etc/config/system:
old md5=8a8b89fd3e87f6a74769104c4842e499
new md5=1fd8bbe3f2154f544f8be688bec32ebe
Segmentation Fault

What's wrong?

--
Daniel

Post #2
jolcese
16 Jul 2007, 21:05

I have the same problem.
The only difference is that I get the Segmetation Fault right after the Downloading ..... line

Jose

Post #3
netprince
17 Jul 2007, 14:54

Your not supposed to use ipkg upgrade to update the system.  There are technical limitations.  You have probably run out of flash space and thats why your getting the seg fault.  This is a common problem, so search the forum for more information.

The discussion might have continued from here.