I am trying to use the openwrt kamikaze distribution on accton box with atheros WiSOC AR2315. The wifi doesn't seem to work with this distribution on this target. I also found another post with same problem on AR2317. The following is the log from the target.

wlan: 0.8.4.2 (0.9.2.1)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.2 (AR5212, AR5312, RF2317)
ath_rate_sample: 1.2 (0.9.2.1)
wlan: mac acl policy registered
ath_ahb: 0.9.4.5 (0.9.2.1)
wifi%d: unable to attach hardware: 'No hardware present or device not yet supported' (HAL status 1)

system type             : Atheros AR2315
cpu model               : MIPS 4KEc V6.4
root@OpenWrt:/# uname -a
Linux OpenWrt 2.6.19.2 #3 Thu Jul 19 13:38:42 PDT 2007 mips unknown

RedBoot> version

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.0 - built 13:54:37, Nov  3 2006

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap61
RAM: 0x80000000-0x81000000, [0x8003e8c0-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.

Please let me know if there is a patch for this issue. The madwifi Makefile has the HAL_TARGET set ap51. I have also tried the kamikaze-7.07 and the issue is still same.
Also let me know if you need any other information in this regard.

Thanks.