OpenWrt Forum Archive

Topic: VLAN settings and WPA with Netgear WGT634U and Kamikaze 7.07

The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
schuon
19 Aug 2007, 21:59

Hi everyone!

Apparently the VLAN got reversed with the current build. At least my WAN interface is on what used to be port 4 earlier on. Can someone confirm this?

Unfurtunatly I am still struggeling with the WPA. I did install wpa_supplicant, but wireless comes up in unencrypted mode only. The wireless settings should be ok, since I restored the backups from an earlier build. Any thoughts where I could check the logs to see what's going wrong?

Cheers,
schuon

Post #2
MMCM
21 Aug 2007, 06:10

wpa_supplicant is for the router being a wireless wpa CLIENT.
For the server you need hostapd.

Post #3
schuon
21 Aug 2007, 10:12

stupid me, thanks a lot!

The discussion might have continued from here.