The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello,
even I think I configured my router Aus WL-500G Premium the right way, my clients (mac & pc) can not see the SSID. But they can connect if the type the SSID and password in.
The parameter I set is this:
nvram set wl0_ssid=lanland
Any idea what I could have done wrong?
thanks in advance.
shifty
Is wl0_closed set to 1?
How do I disable ESSID broadcast? (wiki.openwrt.org/Faq)
Hope this helps,
Charlie
ouch, that`s a bit embarassing.
You are right, that was it.
thanks
The discussion might have continued from here.