Hi!

is 7.09 + 2.6 on asus wl500gp + atheros still unstable/unuseable?

does have someone tried it?

Ciao

I know atleast of the following problems:

- Buttons are not working with hotplug (system just halts, maybe failsafe mode does not work too) - generic 2.6 problem
- qos-scripts: IMQ not working - generic 2.6 problem
- Random segfaults - Broadcom CPU/System code specific

This are enough reasons to stay with 2.4 for now. At least for me.

(Last edited by forum2006 on 29 Sep 2007, 15:46)

this is the open ticket to look at for the random segfaults, there seems to have been a little bit of work done it recently

https://dev.openwrt.org/ticket/2035

what are the buttons suppose to do ?  My reset still works on power on.

If you want 2.6 use 7.06

Forum2006,

I have my wlan network running on asus-wl500gP and kamikaze r8511 and it works without any segfaults.
I don't know if the IMQ works or not but qos seems to work very good. the weird thing that there is two IMQs (imq0 and imq1) and imq1 is always 0kb/s...is this problem?

Bandwidth Monitor 1.1.0

       Iface        RX(KB/sec)   TX(KB/sec)   Total(KB/sec)

          lo            0.000        0.000           0.000
        eth0           69.483       68.166         137.649
        eth1            0.000        0.000           0.000
      eth0.0           20.096       56.384          76.480
      eth0.1           55.836       20.440          76.276
      br-lan           19.892       56.163          76.055
        imq0           55.574       55.574         111.148
        imq1            0.000        0.000           0.000

       Total          220.881      256.727         477.608

Hit CTRL-C to end this madness.