The content of this topic has been archived on 31 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Ok, I was idiot.
I decided to write in a few modifications to the network scripts...
Obviously, I should of tested this first via vmware, but I was in a hurry.
So now by 54GS v1 won't respond on any network interface.
How can I fix this ?
Is adding a serial port going to work, or would that require networking functionality ?
* Edit *
Don't think it matters, but I had the latest Kamikaze running.
(Last edited by delerious010 on 5 Oct 2007, 04:33)
Is boot_wait on? Does it still work? Try that.
Wouldn't that just reset the configs ?
Problem is that the networking scripts are fuxored, configs are fine ?
Either way, i'm off to read up on that, thanks for the idea.
*edit*
It worked, rock on.
Thanks bud.
(Last edited by delerious010 on 5 Oct 2007, 06:43)
The discussion might have continued from here.