OpenWrt Forum Archive

Topic: wireless config

The content of this topic has been archived on 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
jiaxin
12 Oct 2007, 18:16

Hi all,

I'm running Kamikaze 7.09 on Avlia GW2348-2 board.

The Kamikaze image is built from buid system.
The default wireless config file (etc/config/wireless) disable the wifi device.
So I have menully modify this file to enable wifi device after porting image to board.

Then I built an image using my wireless config file replace the default one, hope after porting, the wifi device is enabled.
But it is not although the config file setting is enable.

how I can make wifi device enabled after porting image?

Thanks

Jiaxin

Post #2
kadettgte
12 Oct 2007, 20:11

the best way without messing around with the original build root is to create a package with the scripts & files you want to add / change to the router named something like xscripts. and then build the image with it

The discussion might have continued from here.