Hello,
I'm having trouble getting bluetooth to work on the WR 0.9 release, specifically the firmware posted here:
OpenWRT Firmware for WRT54G3G- New Aug. 25th: http://www.evdoforums.com/viewtopic.php … mp;start=0
It's an awesome package overall but I need help getting BT running.
General, overview type help would be appreciated - with a point and a push in the right direction I'll do all the digging and experimenting.
DETAILS.
Router is a WRTSL54GS. EVDO Connection works thru the USB as follows:
* Novatel U720 USB dongle
* Tethered Sanyo M1 phone through USB cable ("phone as modem" service active).
* Both work directly connected, or via powered USB hub.
* Hotplug does not work 100%, if I unplug/re-plug the phone it I can't get it to dial up even with "ifup - ifdown"
What I'd like to do is connect to the phone to the router via bluetooth (incoming calls ring through only when using the EVDO in BT). Bluetooth **worked** once, but not all the way and very unreliably. I got to the point where the phone could see the router, and vice versa, but they could not connect.
BT works much better with the Kamikaze 7.09, 2.6 kernel, but then I lose WiFi and I have to re-implement all the dial-up EVDO stuff in this firmware. Any suggestions?
~Matt