I am not sure of I destroyed my WAP54G, but its a model 1 (MDG003210516) and I used the current kamakaze 7.09. When its plugged in the Link/act light just blinks intermiitently. Will hold steady for a few seconds and then will blink. Since I have a router on the network at 192.168.1.1 I have tried connecting directly to the WAN ethernet with a crossover cable but cant seem to ping 192.168.1.1. Does anyone have any suggestions?
Topic: Did I brick my wap54G?
The content of this topic has been archived on 28 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
The discussion might have continued from here.
Page 1 of 1