Hi All,
Here's my setup:
[PC1] + [XBOX] ---------------------- [WRT54GS (OpenWRT)] })})})})})})}) [DG834GT (Connection to ADSL Internet)] ---------------------- [PC2] + [PC3]
KEY:
---------- = Ethernet
)})})})} = Wireless
My Xbox and first PC are connected to the [WRT54GS] running OpenWRT via. ethernet. This is then connected to my Netgear [DG834GT] (stock netgear firmware) via. Wireless Client Bridge (the [WRT54GS] is in client mode). This is the router that has the connection to the internet. [PC2] and [PC3] are then connected via. Ethernet to the DG834GT.
[PC2] and [PC3] are both assigned IP addresses via. the [DG834GT]'s DHCP server, both have no problem seeing each other when placed on the same network (in this case network is MSHOME). However they cannot see [PC1] or [XBOX] when placed on the same network.
[PC1] + [XBOX] are both assigned IP addresses via. the [WRT54GS]'s DHCP server, both have no problem seeing each other when placed on the same network (in this case network is MSHOME). They cannot see [PC2] or [PC3] BUT have no problem accessing the [DG834GT] router config.
So my question is, how can I get everything in this network to see each other? I need at least the [WRT54GS] to be able to assign IPs via DHCP as this ensures that the KAI daemon I have running works properly.
Thanks in Advance.