OpenWrt Forum Archive

Topic: kmod-zaptel kmod-ztdummy for RB532

The content of this topic has been archived on 21 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hello!

Can't find how to compile kmod-zaptel package on 709 kamikaze.
Is it possible at all since there is no USB interface on RB532?


It could be found at freewrt repos (https://flyingfish.freewrt.org/~tomcat55/rb_rb532_2_6/)
but for kamikaze I couldn't find it


Does anybody could help.

Sincerely
Kirill

Before you wait and wait until someone posts it build Kamikaze by yourself with the packages you require.

Hello

I've done it
But I can't find kmod-zaptel package in "make menuconfig"
The only zaptel package I've found was libtonezone

Sincerely

Hi Hans!

Kernel modules zaptel and ztdummy loads successfully.
The only problem I've got in the beginning was that my kernel was compiled with CONFIG_CRC_CCITT=n
It should be with =y or =m.

If it functions properly we'll see in near future smile

Sincerely

Hans?

and the question I asked before..
May be you also have a new package for asterisk gui?
The previous package asterisk14-gui_svn-1146-1_mipsel.ipk dated by 29 Jul.
May be something was improved over there...

Sincerely
Kirill

iam wrote:

Kernel modules zaptel and ztdummy loads successfully.
The only problem I've got in the beginning was that my kernel was compiled with CONFIG_CRC_CCITT=n
It should be with =y or =m.

If it functions properly we'll see in near future smile

You'd need an asterisk 1.4 that is compiled with --with-zaptel and that option is not in the Makefile in the packages repository righ now. Maybe I could send you the zaptel14 patch, so you can compile and install it in your development environment, and then you could try and compile asterisk with zaptel ?

Hans.

iam wrote:

May be you also have a new package for asterisk gui?
The previous package asterisk14-gui_svn-1146-1_mipsel.ipk dated by 29 Jul.
May be something was improved over there...

Just created a package from the current svn revision (r1733) but I don't feel like trying this myself anymore...

  http://zandbelt.dyndns.org/asterisk/ast … mipsel.ipk

Can't really upload a patch for the source package repository until asterisk14-gui is actually released and you can get the source code somewhere else than from SVN.

Hans.

1. About patch
thank you for your help. My address iam@ltt.ru. I will wait for this patch.
If you could also write a short instruction on how to apply it, it would be perfect

2 About asteisk gui
I'll install it right now to see if there any improvements appears. I realy hope so because as I think it is the only gui that could be used in such a devices at the moment. Unfortunately.

And again, many thanks for your help!

Sincerely

zandbelt wrote:

Just created a package from the current svn revision (r1733) but I don't feel like trying this myself anymore...

  http://zandbelt.dyndns.org/asterisk/ast … mipsel.ipk

Can't really upload a patch for the source package repository until asterisk14-gui is actually released and you can get the source code somewhere else than from SVN.

Hans.

Hello Hans!

Didn'd you refresh asterisk-gui package since r1733?

If yes could you post us a link to it.

AsteriskNOW already has it's first release, so may be asterisk14-gui also has some improvements.

Sincerely
Kirill

I have write my own Makefile for kmod-zaptel module but its not compile successfuly lots of error i got so anybody have working Makefile so i can find example and correct my Makefile

I have IXP4XX hardware and i want to install asterisk with zaptel driver support but i dont know zaptel support IXP4XX

If anybody have idea then kindly suggest

The discussion might have continued from here.