OpenWrt Forum Archive

Topic: pptpd no more working after upgrade RC4 -> 0.9

The content of this topic has been archived on 10 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

After upgrading form WhiteRussian RC4 to 0.9 my pptpd daemon is no more working:

Nov 11 12:44:54 (none) kern.info pptpd[761]: CTRL: Client 91.10.127.128 control connection started
Nov 11 12:44:54 (none) kern.info pptpd[761]: CTRL: Starting call (launching pppd, opening GRE)
Nov 11 12:44:54 (none) kern.notice pppd[762]: pppd 2.4.3 started by root, uid 0
Nov 11 12:44:54 (none) kern.info pppd[762]: Using interface ppp1
Nov 11 12:44:54 (none) kern.notice pppd[762]: Connect: ppp1 <--> /dev/pts/1
Nov 11 12:44:54 (none) kern.err pptpd[761]: GRE: read(fd=8,buffer=100085ec,len=8260) from network failed: status = -1 error = Protocol not available
Nov 11 12:44:54 (none) kern.err pptpd[761]: CTRL: GRE read or PTY write failed (gre,pty) = (8,7)
Nov 11 12:44:54 (none) kern.debug pptpd[761]: CTRL: Reaping child PPP[762]
Nov 11 12:44:54 (none) kern.notice pppd[762]: Modem hangup
Nov 11 12:44:55 (none) kern.notice pppd[762]: Connection terminated.
Nov 11 12:44:55 (none) kern.info pppd[762]: Exit.
Nov 11 12:44:55 (none) kern.info pptpd[761]: CTRL: Client 91.10.127.128 control connection finished

Setup/Config/Firewall is the same than before.
How to debug? Other ideas? Please help.

Do you receive any answers or found solution on this?
I have exactly the same problem here...

no answer but with these packages its working again for me:

pptp - 1.6.0-3 -
pptpd - 1.3.0-2 -

The discussion might have continued from here.