Is there a functional difference between the wrt300n v1.0, v1.1, v1.2 ? Or do those models all get treated as v1 ?
Topic: Is the wrt300n v1.1 supported?
The content of this topic has been archived on 7 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
AFAIK there is no v1.2, and the difference between v1.0 and v1.1 is only that it has an integrated radio instead of the CardBus card. So I guess it should work, but no promises.
I am use wrt300n v1.1 device
but both below two flashing method are fail , i can't flashing firmware success
1. via tftp
2. via linsys's web GUI
my firmware is "openwrt-wrt300n_v1-2.4-squashfs.bin" and try "openwrt-brcm47xx-2.6-squashfs.trx" also
have any kind expert can give me guide? thx!!
The discussion might have continued from here.
Page 1 of 1