OpenWrt Forum Archive

Topic: WPA and PDA

The content of this topic has been archived on 14 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
booboo-001
27 Nov 2007, 12:30

Hi.

I can connect my Fujitsu-Siemens Pocket LOOX 420 PDA using WEP. When I switch the router to WPA-PSK, all other PCs can connect, but PDA cannot.

I have Linksys WRT54GL and Asus WL-500gP, both with Kamikaze 7.09 installed.

I can successfully connect PDA to other routers (e.g. Edimax with original firmware).

How can I connect my PDA using WPA to Kamikaze?

My config:

config wifi-device  wl0
        option type     broadcom
        option channel  7

        # REMOVE THIS LINE TO ENABLE WIFI:
        # option disabled 1

config wifi-iface
        option device   wl0
        option network  lan
        option mode     ap
        option ssid     Marek
        option encryption psk
        option key      "XXXXXXXXXXXXXXXX"

--
Booboo

Post #2
booboo-001
1 Dec 2007, 10:01

Nobody can help?

--
Booboo

Post #3
alexsamad
20 Dec 2007, 05:58

I had to use wpa-psk2, found wep wasn't working for me

The discussion might have continued from here.