Hello,
i have flashed my Edmiax BR-6104KP with the  KAMIKAZE (bleeding edge, r9663) Firmware over a Hany Datacable that im soldering an JP2 on the Board.
Ok after Flashing i can login with telenet. Change the Passwort with "passwd" txpe exit, and would connet with Putty over the SSH Protokol...tata no Connection.
So open Console over Serial Port, edit the network interfaces ind ipkg.conf, made ipkg udatr und install Dropbear.
After Reboot connecting with Putty. Warn for change Fingerprint -> Ok, Type login root & passwort..... tata connection killt.
Open Wincp with SCP connect, and can Login???
But i can NOT coppy files to the Usb-Stick or Edit Files.
I can only see the files or create new Files and Folders?!

Also no Login with Putty& SSh, only over the Com Port an Pc with Soldering datacable.
No Acces with Winscp over the Files on the Stick (Rootfile System).

http://sourceforge.net/project/showfile … _id=138655
USB Root firmware ->           usbroot-2.6.23.9-xmodem.bin   // In Flash
USB root file system ->      usbrootfs-1.tar.bz2                  // @ Usb Stick

Ps:
Sorry for my ppor English but i have not found an German Forum for this.