Hi all!

I'm attempting to get a pptp-connection up from a Kamikaze board to a pptp-server. I get the following:

Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01
IPCP: timeout sending Config-Requests
MPPE disabled
Connection terminated.

Debug gives me a bit more:

sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0>]
rcvd [IPCP ConfRej id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
Received bad configure-rej:  03 06 00 00 00 00 02 06 00 2d 0f 01

Does this ring a bell with anyone here?