OpenWrt Forum Archive

Topic: MMC mod on WRT54GL ... and still be able to use SES button?

The content of this topic has been archived on 19 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
qwillio
19 Jan 2008, 09:00

I did the SD/MMC mod from this directions:
http://web.archive.org/web/200604062143 … _done.html

The card works great, but I have to do

echo "0x9c" > /proc/diag/gpiomask

before mounting the card, or I get all kinds of weird read/write errors. OK, so ... when I do that, I can no longer use the SES button for toggling other scripts.  Is there a way that I can have the SD card mounted, and still be able to use the SES button?  Possibly by soldering to different points?

Thanks in advance. smile

Post #2
forum2008
19 Jan 2008, 10:55
qwillio wrote:

Is there a way that I can have the SD card mounted, and still be able to use the SES button?  Possibly by soldering to different points?

If you don't use the GPIOs used by the SES button it should be possible.

The discussion might have continued from here.