OpenWrt Forum Archive

Topic: br2684ctl -problem

The content of this topic has been archived on 30 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
newWrt
25 Jan 2008, 15:53

hi  everybody,
I am using the br2684ctl command to create 5 virtual channels over atm, I manage to create 4 vc with the command but only 4.
When I tried to create the fifth vc I get this error message :

#########################################
RFC1483/2684 bridge: Interface "nas0" created sucessfully

RFC1483/2684 bridge: Communicating over ATM 0.8.35, encapsulation: LLC

Using default QOS
QOS: vpi 8 vci 35

RFC1483/2684 bridge: Could not configure interface:Operation not permitted
Created bridge interface will be deleted, please enter correct VPI/VCI values

RFC1483/2684 bridge: Could not configure interface:File exists
RFC1483/2684 bridge: Interface "nas0" done
###############################################

This is the command I tried :

$br2684ctl -b -c 0 -e 0 -q nrtvbr,aal5:max_pcr=302,pcr=302,mbs=75 -a 8.35

Post #2
wrtsg
31 Jan 2008, 16:31

no problem, i found a solution.

The discussion might have continued from here.