Hi,
I have already read the posts in this forum telling about OpenWrt issues dealing with adsl routers.
I would like to buy an adsl router/access point to use with OpenWrt, but according to the table of hardware and some posts I read on this forum, it sounds like there aren't devices completely supported in which OpenWrt is stable. Are they?
In particular I read about DG834v2, which is a very nice device, but should still have some issues with OpenWrt.
Any advice is appreciated.
Thank you.

I have used OpenWrt (but not heavily) on some AR7s (DG834v2 is an AR7) and I have in general not had a problem, except for wireless.  On older versions of trunk I have got wireless to work, but current versions hang the router as soon as the module is inserted.

I have not had a problem with ADSL on the router, but as I said I have not used it heavily.

If you want to use wireless, though, I would not suggest an AR7, since the acx wireless driver is not stable yet.  (Of course some people seem to get it to work

Hi ggp81,
I was also looking for a xDSL/AP hardware compatible with openwrt but I think I will just use my old AP/modem as a modem and buy a new compatible AP and use them together.
I think I'll buy the WL-500g Premium.

cheers

Tex-Twil:
I also think I will do as you, but I would be happy to use only one device with OpenWrt installed.
I think I will wait OpenWrt to be mature to correctly run on those devices.

So everybody's experience about ADSL devices are still appreciated.
Thanks very much

Hi,
I use 7.09 on a wl500gp with this:

Bus 001 Device 008: ID 1110:900f Analog Devices Canada, Ltd (Allied Telesyn) AT-AR215 DSL Modem

kmod-ueagle-atm, kernel 2.6.22.. no wifi, no issues so far.

I ordered the wl500gP yesterday

I'm having issues with ueagle, can't get line syncronisation. You got any idea? (I also have an AT-AR215, one annex A and one annex B)