Topic: scdp (Cisco Discovery Protocol)

The content of this topic has been archived on 3 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

rafit

6 Feb 2008, 10:24

Hi,
Kamikaze on Linksys WRT-54GL.
scdp does not work as expected. It works only on eth0, and even then does not send the ip address.
I see this message in dmesg: " scdp uses obsolete (PF_INET,SOCK_PACKET) " I don't read anything on wl0

Any help?

Is there a kernel with cdp built in so that I can get neighbours in /proc?

Regards,
solomon.

The discussion might have continued from here.

Page 1 of 1