The content of this topic has been archived on 23 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi,
I found a new AR7 router, it's the "Roper FlyNet 125" which is quite common here in Italy due to its low price (~60€).
Here is the product page: http://www.roper-europe.com/pagine/prod … p;lang=eng
And here some info I could get from it as well as mtd dumps: http://teknoraver.campuslife.it/roper/
I'll update the wiki soon whit this device.
I can't find a codepattern on the mdt, if anyone helps me this would be fine
Greets,
Matteo Croce
(Last edited by rootkit on 13 Feb 2008, 17:43)
mtd2 - ADAM2 bootloader
mtd3 - environment
mtd4 - firmware for dsp?
mtd1 - kernel
mtd0 - squash filesystem
Regards
Stefan
mtd2 - ADAM2 bootloader
mtd3 - environment
mtd4 - firmware for dsp?
mtd1 - kernel
mtd0 - squash filesystemRegards
Stefan
mtd2 pspboot
mtd4 fw header+kernel+squash
0x-0x8f
0x90-0x78fff
0x79000-0x3dffff
quote SETENV mtd0,0x90099000,0x90200000
quote SETENV mtd1,0x90020090,0x90099000
quote SETENV mtd2,0x90000000,0x90010000
quote SETENV mtd3,0x90010000,0x90020000
quote SETENV mtd4,0x90020000,0x90200000
quote REBOOT
bin
quote MEDIA FLSH
put mtd4 "mtd4 mtd4"
(Last edited by AndyI on 13 Feb 2008, 23:02)
The discussion might have continued from here.