Topic: Remove OpenWRT, flash original firmware: PPPoE won't work

The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

DragonK

13 Feb 2008, 18:13

Hello,

As the subject says, I've got a problem with the router (Linksys WRT54GL 1.1) when reflashing with the original firmware (over OpenWRT 0.9): everything seems to work ok, except PPPoE, which will refuse to connect...
I suspect there are some nvram values left which screw up the process, but I'm not sure... DD-WRT doesn't connect either. Any ideas on this ?

Thanks

The discussion might have continued from here.

Page 1 of 1