OpenWrt Forum Archive

Topic: problems with b43 and usb-ohci on bcm4710 / kamikaze trunk

The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
masc
15 Feb 2008, 01:55

hi!

i have a wl-hdd and tried to install the latest kamikaze svn (r10459 and erlier r10436) on it. compiling and installing works well, apart from a small issue with inittab/ash.

i installed the usb packages, configured wireless as client with wep. when rebooting i noticed a significantly longer boottime with the usb things installed, and i saw some problems with the b43 in the logfile. deleting file per file, i got the slowing module: usb-ohci. lots of
'b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.'
in the logfile. when deleting  ohci-hcd.ko it starts much faster and without error logs. this procedure is reproducible. btw, usb works fine, at least with mass storage and usb-video.

i don't know to investigate further, should i create a ticket on development.openwrt.org?

the other part was on inittab. i got lots of entries in the logfile with something like 'process '/bin/ash --login'  exited. Scheduling it for restart.' every second. i had to delete the line
ttyS0::askfirst:/bin/ash --login
in /etc/inittab

bye...masc.

logread with ohci-hcd

Jan  1 00:00:09 laemmchen user.warn kernel: Built 1 zonelists in Zone order.  Total pages: 4064
Jan  1 00:00:09 laemmchen user.notice kernel: Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
Jan  1 00:00:09 laemmchen user.warn kernel: Enabling BCM4710A0 cache workarounds.
Jan  1 00:00:09 laemmchen user.warn kernel: Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 00:00:09 laemmchen user.warn kernel: Primary data cache 4kB, 2-way, linesize 16 bytes.
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB refill handler (21 instructions).
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB load handler fastpath (33 instructions).
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB store handler fastpath (33 instructions).
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB modify handler fastpath (32 instructions).
Jan  1 00:00:09 laemmchen user.warn kernel: PID hash table entries: 64 (order: 6, 256 bytes)
Jan  1 00:00:09 laemmchen user.warn kernel: Using 62.400 MHz high precision timer.
Jan  1 00:00:09 laemmchen user.info kernel: Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: Memory: 13664k/16384k available (2009k kernel code, 2720k reserved, 286k data, 120k init, 0k highmem)
Jan  1 00:00:09 laemmchen user.debug kernel: Calibrating delay loop... 82.43 BogoMIPS (lpj=164864)
Jan  1 00:00:09 laemmchen user.warn kernel: Mount-cache hash table entries: 512
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 16
Jan  1 00:00:09 laemmchen user.info kernel: ssb: PCIcore in host mode found
Jan  1 00:00:09 laemmchen user.warn kernel: registering PCI controller with io_map_base unset
Jan  1 00:00:09 laemmchen user.info kernel: PCI: fixing up bridge
Jan  1 00:00:09 laemmchen user.debug kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64
Jan  1 00:00:09 laemmchen user.info kernel: PCI: Fixing up device 0000:00:00.0
Jan  1 00:00:09 laemmchen user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 2
Jan  1 00:00:09 laemmchen user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: TCP established hash table entries: 512 (order: 0, 4096 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: TCP: Hash tables configured (established 512 bind 512)
Jan  1 00:00:09 laemmchen user.info kernel: TCP reno registered
Jan  1 00:00:09 laemmchen user.notice kernel: detected lzma initramfs
Jan  1 00:00:09 laemmchen user.notice kernel: initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
Jan  1 00:00:09 laemmchen user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan  1 00:00:09 laemmchen user.warn kernel: Registering mini_fo version $Id$
Jan  1 00:00:09 laemmchen user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
Jan  1 00:00:09 laemmchen user.info kernel: io scheduler noop registered
Jan  1 00:00:09 laemmchen user.info kernel: io scheduler deadline registered (default)
Jan  1 00:00:09 laemmchen user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
Jan  1 00:00:09 laemmchen user.info kernel: b44.c:v1.01 (Jun 16, 2006)
Jan  1 00:00:09 laemmchen user.info kernel: eth0: Broadcom 10/100BaseT Ethernet 00:11:d8:b7:ec:8c
Jan  1 00:00:09 laemmchen user.info kernel: eth1: Broadcom 10/100BaseT Ethernet 00:11:d8:b7:ec:8c
Jan  1 00:00:09 laemmchen user.warn kernel: flash init: 0x1fc00000 0x00400000
Jan  1 00:00:09 laemmchen user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 00:00:09 laemmchen user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:00:09 laemmchen user.warn kernel: Physically mapped flash: Swapping erase regions for broken CFI table.
Jan  1 00:00:09 laemmchen user.notice kernel: number of CFI chips: 1
Jan  1 00:00:09 laemmchen user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 00:00:09 laemmchen user.notice kernel: Flash device: 0x400000 at 0x1fc00000
Jan  1 00:00:09 laemmchen user.notice kernel: bootloader size: 262144
Jan  1 00:00:09 laemmchen user.notice kernel: Creating 4 MTD partitions on "Physically mapped flash":
Jan  1 00:00:09 laemmchen user.notice kernel: 0x00000000-0x00040000 : "cfe"
Jan  1 00:00:09 laemmchen user.notice kernel: 0x00040000-0x003f0000 : "linux"
Jan  1 00:00:09 laemmchen user.notice kernel: 0x000f5400-0x003f0000 : "rootfs"
Jan  1 00:00:09 laemmchen user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 00:00:09 laemmchen user.notice kernel: mtd: partition "rootfs" set to be root filesystem
Jan  1 00:00:09 laemmchen user.info kernel: mt
Jan  1 00:00:09 laemmchen user.info kernel: d: partition "rootfs_data" created automatically, ofs=1D0000, len=220000 
Jan  1 00:00:09 laemmchen user.notice kernel: 0x001d0000-0x003f0000 : "rootfs_data"
Jan  1 00:00:09 laemmchen user.notice kernel: 0x003f0000-0x00400000 : "nvram"
Jan  1 00:00:09 laemmchen user.warn kernel: nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Jan  1 00:00:09 laemmchen user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:09 laemmchen user.info kernel: TCP vegas registered
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 1
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 17
Jan  1 00:00:09 laemmchen user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan  1 00:00:09 laemmchen user.info kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan  1 00:00:09 laemmchen user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 00:00:09 laemmchen user.info kernel: Freeing unused kernel memory: 120k freed
Jan  1 00:00:09 laemmchen user.warn kernel: Please be patient, while OpenWrt loads ...
Jan  1 00:00:09 laemmchen user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  1 00:00:09 laemmchen user.warn kernel: diag: Detected 'ASUS WL-HDD'
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth0: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:09 laemmchen user.warn kernel: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:09 laemmchen user.warn kernel: No Robo switch in managed mode found
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth1: Invalid phy address (1)
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth2: No such device
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth3: No such device
Jan  1 00:00:09 laemmchen user.warn kernel: BFL_ENETADM not set in boardflags. Use force=1 to ignore.
Jan  1 00:00:09 laemmchen user.info kernel: mini_fo: using base directory: /
Jan  1 00:00:09 laemmchen user.info kernel: mini_fo: using storage directory: /jffs
Jan  1 00:00:12 laemmchen user.err kernel: br-wan: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Jan  1 00:00:12 laemmchen user.info kernel: device eth1 entered promiscuous mode
Jan  1 00:00:14 laemmchen user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan  1 00:00:14 laemmchen user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan  1 00:00:14 laemmchen user.info kernel: b44: eth1: Link is up at 10 Mbps, half duplex.
Jan  1 00:00:14 laemmchen user.info kernel: b44: eth1: Flow control is off for TX and off for RX.
Jan  1 00:00:14 laemmchen user.info kernel: br-wan: port 1(eth1) entering learning state
Jan  1 00:00:14 laemmchen user.info kernel: br-wan: topology change detected, propagating
Jan  1 00:00:14 laemmchen user.info kernel: br-wan: port 1(eth1) entering forwarding state
Jan  1 00:00:16 laemmchen user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth0: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:16 laemmchen user.warn kernel: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:16 laemmchen user.warn kernel: No Robo switch in managed mode found
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth1: Invalid phy address (1)
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth2: No such device
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth3: No such device
Jan  1 00:00:16 laemmchen user.warn kernel: BFL_ENETADM not set in boardflags. Use force=1 to ignore.
Jan  1 00:00:17 laemmchen user.info kernel: usbcore: registered new interface driver usbfs
Jan  1 00:00:17 laemmchen user.info kernel: usbcore: registered new interface driver hub
Jan  1 00:00:17 laemmchen user.info kernel: usbcore: registered new device driver usb
Jan  1 00:00:17 laemmchen user.warn kernel: PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
Jan  1 00:00:17 laemmchen user.info kernel: PCI: Fixing up device 0000:00:02.0
Jan  1 00:00:17 laemmchen user.debug kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:00:02.0
Jan  1 00:00:17 laemmchen user.info kernel: b43-phy0: Broadcom 4306 WLAN found
Jan  1 00:00:17 laemmchen user.debug kernel: phy0: Selected rate control algorithm 'simple'
Jan  1 00:00:20 laemmchen user.debug kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 00:00:20 laemmchen user.info kernel: ohci_hcd ssb0:4: SSB OHCI Controller
Jan  1 00:00:20 laemmchen user.info kernel: ohci_hcd ssb0:4: new USB bus registered, assigned bus number 1
Jan  1 00:00:20 laemmchen user.info kernel: ohci_hcd ssb0:4: irq 3, io mem 0x18004000
Jan  1 00:00:20 laemmchen user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 00:00:20 laemmchen user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 00:00:20 laemmchen user.info kernel: hub 1-0:1.0: 2 ports detected
Jan  1 00:00:20 laemmchen user.info kernel: usb 1-2: new low speed USB device using ohci_hcd and address 2
Jan  1 00:00:20 laemmchen user.info kernel: Linux video capture interface: v2.00
Jan  1 00:00:20 laemmchen user.err kernel: usb 1-2: device descriptor read/64, error -62
Jan  1 00:00:21 laemmchen user.err kernel: usb 1-2: device descriptor read/64, error -62
Jan  1 00:00:21 laemmchen user.info kernel: usb 1-2: new low speed USB device using ohci_hcd and address 3
Jan  1 00:00:21 laemmchen user.err kernel: usb 1-2: device descriptor read/64, error -62
Jan  1 00:00:21 laemmchen user.err kernel: usb 1-2: device descriptor read/64, error -62
Jan  1 00:00:22 laemmchen user.info kernel: usb 1-2: new low speed USB device using ohci_hcd and address 4
Jan  1 00:00:22 laemmchen user.err kernel: usb 1-2: device not accepting address 4, error -62
Jan  1 00:00:22 laemmchen user.info kernel: usb 1-2: new low speed USB device using ohci_hcd and address 5
Jan  1 00:00:23 laemmchen user.err kernel: usb 1-2: device not accepting address 5, error -62
Jan  1 00:01:20 laemmchen user.err kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
Jan  1 00:01:20 laemmchen user.err kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware and download the correct firmware (version 4).
Jan  1 00:01:20 laemmchen user.info : ifconfig: SIOCSIFFLAGS: No such file or directory
Jan  1 00:02:20 laemmchen user.err kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
Jan  1 00:02:20 laemmchen user.err kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware and download the correct firmware (version 4).
Jan  1 00:02:20 laemmchen user.info : ifconfig: SIOCSIFFLAGS: No such file or directory
Jan  1 00:03:20 laemmchen user.err kernel: b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
Jan  1 00:03:20 laemmchen user.err kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware and download the correct firmware (version 4).
Jan  1 00:03:20 laemmchen user.info : ifconfig: SIOCSIFFLAGS: No such file or directory
Jan  1 00:03:22 laemmchen user.info : cp: write error: No such device
Jan  1 00:03:22 laemmchen user.err kernel: firmware_loading_store: unexpected value (0)
Jan  1 00:03:22 laemmchen user.err kernel: b43-phy0 ERROR: Firmware file "b43/b0g0initvals5.fw" not found or load failed.
Jan  1 00:03:22 laemmchen user.err kernel: b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware and download the correct firmware (version 4).
Jan  1 00:03:22 laemmchen user.info : /sbin/hotplug-call: line 15ifconfig: SIOCSIFFLAGS: No such file or directory
Jan  1 00:03:22 laemmchen user.info : : cannot create /sys/devices/pci0000:00/0000:00:02.0/ssb1:0/firmware/ssb1:0/loading: nonexistent directory
Jan  1 00:03:22 laemmchen user.info : cp: write error: No such device
Jan  1 00:03:22 laemmchen user.info : /sbin/hotplug-call: line 15: cannot create /sys/devices/pci0000:00/0000:00:02.0/ssb1:0/firmware/ssb1:0/loading: nonexistent directory
Jan  1 00:03:22 laemmchen user.info : /sbin/hotplug-call: line 15: cannot create /sys/devices/pci0000:00/0000:00:02.0/ssb1:0/firmware/ssb1:0/loading: nonexistent directory
Jan  1 00:03:22 laemmchen user.info : cp: cannot remove '/sys/devices/pci0000:00/0000:00:02.0/ssb1:0/firmware/ssb1:0/data': No such file or directory
Jan  1 00:03:23 laemmchen user.info : /sbin/hotplug-call: line 15: cannot create /sys/devices/pci0000:00/0000:00:02.0/ssb1:0/firmware/ssb1:0/loading: nonexistent directory
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: Initial auth_alg=0
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: authenticate with AP 00:11:d8:b7:e8:8c
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: RX authentication from 00:11:d8:b7:e8:8c (alg=0 transaction=2 status=0)
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: authenticated
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: associate with AP 00:11:d8:b7:e8:8c
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: RX AssocResp from 00:11:d8:b7:e8:8c (capab=0x411 status=0 aid=1)
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: associated
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
Jan  1 00:03:27 laemmchen user.debug kernel: wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
Jan  1 00:03:30 laemmchen authpriv.info dropbear[720]: Running in background
Jan  1 00:03:31 laemmchen user.info : sysctl: error: 'net.ipv6.conf.all.forwarding' is an unknown key
Jan  1 00:03:51 laemmchen authpriv.info dropbear[732]: Child connection from 192.168.17.115:53748
Jan  1 00:04:01 laemmchen authpriv.notice dropbear[732]: password auth succeeded for 'root' from 192.168.17.115:53748

logread without ohci-hcd

Jan  1 00:00:09 laemmchen syslog.info syslogd started: BusyBox v1.8.2
Jan  1 00:00:09 laemmchen user.notice kernel: klogd started: BusyBox v1.8.2 (2008-02-12 16:41:07 CET)
Jan  1 00:00:09 laemmchen user.notice kernel: Linux version 2.6.23.16 (masc@gusti) (gcc version 4.1.2) #1 Thu Feb 14 22:37:07 CET 2008
Jan  1 00:00:09 laemmchen user.warn kernel: CPU revision is: 00024000
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 0 found: SDRAM (cc 0x803, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 1 found: ILine 20 (cc 0x801, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 3 found: V90 (cc 0x807, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 4 found: USB 1.1 Hostdev (cc 0x808, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 5 found: PCI (cc 0x804, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 6 found: MIPS (cc 0x805, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 7 found: EXTIF (cc 0x811, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Core 8 found: Fast Ethernet (cc 0x806, rev 0x00, vendor 0x4243)
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Initializing MIPS core...
Jan  1 00:00:09 laemmchen user.info kernel: ssb: set_irq: core 0x0806, irq 2 => 2
Jan  1 00:00:09 laemmchen user.info kernel: ssb: set_irq: core 0x0804, irq 4 => 3
Jan  1 00:00:09 laemmchen user.info kernel: ssb: set_irq: core 0x0806, irq 0 => 4
Jan  1 00:00:09 laemmchen user.info kernel: ssb: Sonics Silicon Backplane found at address 0x18000000
Jan  1 00:00:09 laemmchen user.warn kernel: Determined physical RAM map:
Jan  1 00:00:09 laemmchen user.warn kernel:  memory: 01000000 @ 00000000 (usable)
Jan  1 00:00:09 laemmchen user.info kernel: Initrd not found or empty - disabling initrd
Jan  1 00:00:09 laemmchen user.debug kernel: On node 0 totalpages: 4096
Jan  1 00:00:09 laemmchen user.debug kernel:   Normal zone: 32 pages used for memmap
Jan  1 00:00:09 laemmchen user.debug kernel:   Normal zone: 0 pages reserved
Jan  1 00:00:09 laemmchen user.debug kernel:   Normal zone: 4064 pages, LIFO batch:0
Jan  1 00:00:09 laemmchen user.debug kernel:   Movable zone: 0 pages used for memmap
Jan  1 00:00:09 laemmchen user.warn kernel: Built 1 zonelists in Zone order.  Total pages: 4064
Jan  1 00:00:09 laemmchen user.notice kernel: Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
Jan  1 00:00:09 laemmchen user.warn kernel: Enabling BCM4710A0 cache workarounds.
Jan  1 00:00:09 laemmchen user.warn kernel: Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Jan  1 00:00:09 laemmchen user.warn kernel: Primary data cache 4kB, 2-way, linesize 16 bytes.
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB refill handler (21 instructions).
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB load handler fastpath (33 instructions).
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB store handler fastpath (33 instructions).
Jan  1 00:00:09 laemmchen user.info kernel: Synthesized TLB modify handler fastpath (32 instructions).
Jan  1 00:00:09 laemmchen user.warn kernel: PID hash table entries: 64 (order: 6, 256 bytes)
Jan  1 00:00:09 laemmchen user.warn kernel: Using 62.400 MHz high precision timer.
Jan  1 00:00:09 laemmchen user.info kernel: Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: Memory: 13664k/16384k available (2009k kernel code, 2720k reserved, 286k data, 120k init, 0k highmem)
Jan  1 00:00:09 laemmchen user.debug kernel: Calibrating delay loop... 82.43 BogoMIPS (lpj=164864)
Jan  1 00:00:09 laemmchen user.warn kernel: Mount-cache hash table entries: 512
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 16
Jan  1 00:00:09 laemmchen user.info kernel: ssb: PCIcore in host mode found
Jan  1 00:00:09 laemmchen user.warn kernel: registering PCI controller with io_map_base unset
Jan  1 00:00:09 laemmchen user.info kernel: PCI: fixing up bridge
Jan  1 00:00:09 laemmchen user.debug kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64
Jan  1 00:00:09 laemmchen user.info kernel: PCI: Fixing up device 0000:00:00.0
Jan  1 00:00:09 laemmchen user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 2
Jan  1 00:00:09 laemmchen user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: TCP established hash table entries: 512 (order: 0, 4096 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 00:00:09 laemmchen user.info kernel: TCP: Hash tables configured (established 512 bind 512)
Jan  1 00:00:09 laemmchen user.info kernel: TCP reno registered
Jan  1 00:00:09 laemmchen user.notice kernel: detected lzma initramfs
Jan  1 00:00:09 laemmchen user.notice kernel: initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
Jan  1 00:00:09 laemmchen user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan  1 00:00:09 laemmchen user.warn kernel: Registering mini_fo version $Id$
Jan  1 00:00:09 laemmchen user.info kernel: JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
Jan  1 00:00:09 laemmchen user.info kernel: io scheduler noop registered
Jan  1 00:00:09 laemmchen user.info kernel: io scheduler deadline registered (default)
Jan  1 00:00:09 laemmchen user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
Jan  1 00:00:09 laemmchen user.info kernel: b44.c:v1.01 (Jun 16, 2006)
Jan  1 00:00:09 laemmchen user.info kernel: eth0: Broadcom 10/100BaseT Ethernet 00:11:d8:b7:ec:8c
Jan  1 00:00:09 laemmchen user.info kernel: eth1: Broadcom 10/100BaseT Ethernet 00:11:d8:b7:ec:8c
Jan  1 00:00:09 laemmchen user.warn kernel: flash init: 0x1fc00000 0x00400000
Jan  1 00:00:09 laemmchen user.info kernel: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 00:00:09 laemmchen user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:00:09 laemmchen user.warn kernel: Physically mapped flash: Swapping erase regions for broken CFI table.
Jan  1 00:00:09 laemmchen user.notice kernel: number of CFI chips: 1
Jan  1 00:00:09 laemmchen user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 00:00:09 laemmchen user.notice kernel: Flash device: 0x400000 at 0x1fc00000
Jan  1 00:00:09 laemmchen user.notice kernel: bootloader size: 262144
Jan  1 00:00:09 laemmchen user.notice kernel: Creating 4 MTD partitions on "Physically mapped flash":
Jan  1 00:00:09 laemmchen user.notice kernel: 0x00000000-0x00040000 : "cfe"
Jan  1 00:00:09 laemmchen user.notice kernel: 0x00040000-0x003f0000 : "linux"
Jan  1 00:00:09 laemmchen user.notice kernel: 0x000f5400-0x003f0000 : "rootfs"
Jan  1 00:00:09 laemmchen user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 00:00:09 laemmchen user.notice kernel: mtd: partition "rootfs" set to be root filesystem
Jan  1 00:00:09 laemmchen user.info kernel: mt
Jan  1 00:00:09 laemmchen user.info kernel: d: partition "rootfs_data" created automatically, ofs=1D0000, len=220000 
Jan  1 00:00:09 laemmchen user.notice kernel: 0x001d0000-0x003f0000 : "rootfs_data"
Jan  1 00:00:09 laemmchen user.notice kernel: 0x003f0000-0x00400000 : "nvram"
Jan  1 00:00:09 laemmchen user.warn kernel: nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Jan  1 00:00:09 laemmchen user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:09 laemmchen user.info kernel: TCP vegas registered
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 1
Jan  1 00:00:09 laemmchen user.info kernel: NET: Registered protocol family 17
Jan  1 00:00:09 laemmchen user.info kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan  1 00:00:09 laemmchen user.info kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan  1 00:00:09 laemmchen user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 00:00:09 laemmchen user.info kernel: Freeing unused kernel memory: 120k freed
Jan  1 00:00:09 laemmchen user.warn kernel: Please be patient, while OpenWrt loads ...
Jan  1 00:00:09 laemmchen user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  1 00:00:09 laemmchen user.warn kernel: diag: Detected 'ASUS WL-HDD'
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth0: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:09 laemmchen user.warn kernel: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:09 laemmchen user.warn kernel: No Robo switch in managed mode found
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth1: Invalid phy address (1)
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth2: No such device
Jan  1 00:00:09 laemmchen user.warn kernel: Probing device eth3: No such device
Jan  1 00:00:09 laemmchen user.warn kernel: BFL_ENETADM not set in boardflags. Use force=1 to ignore.
Jan  1 00:00:09 laemmchen user.info kernel: mini_fo: using base directory: /
Jan  1 00:00:09 laemmchen user.info kernel: mini_fo: using storage directory: /jffs
Jan  1 00:00:12 laemmchen user.err kernel: br-wan: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Jan  1 00:00:12 laemmchen user.info kernel: device eth1 entered promiscuous mode
Jan  1 00:00:14 laemmchen user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan  1 00:00:14 laemmchen user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan  1 00:00:14 laemmchen user.info kernel: b44: eth1: Link is up at 10 Mbps, half duplex.
Jan  1 00:00:14 laemmchen user.info kernel: b44: eth1: Flow control is off for TX and off for RX.
Jan  1 00:00:14 laemmchen user.info kernel: br-wan: port 1(eth1) entering learning state
Jan  1 00:00:14 laemmchen user.info kernel: br-wan: topology change detected, propagating
Jan  1 00:00:14 laemmchen user.info kernel: br-wan: port 1(eth1) entering forwarding state
Jan  1 00:00:16 laemmchen user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth0: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:16 laemmchen user.warn kernel: [/home/masc/Desktop/kamikaze/trunk/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
Jan  1 00:00:16 laemmchen user.warn kernel: No Robo switch in managed mode found
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth1: Invalid phy address (1)
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth2: No such device
Jan  1 00:00:16 laemmchen user.warn kernel: Probing device eth3: No such device
Jan  1 00:00:16 laemmchen user.warn kernel: BFL_ENETADM not set in boardflags. Use force=1 to ignore.
Jan  1 00:00:17 laemmchen user.info kernel: usbcore: registered new interface driver usbfs
Jan  1 00:00:17 laemmchen user.info kernel: usbcore: registered new interface driver hub
Jan  1 00:00:17 laemmchen user.info kernel: usbcore: registered new device driver usb
Jan  1 00:00:17 laemmchen user.warn kernel: PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
Jan  1 00:00:17 laemmchen user.info kernel: PCI: Fixing up device 0000:00:02.0
Jan  1 00:00:17 laemmchen user.debug kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
Jan  1 00:00:17 laemmchen user.info kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:00:02.0
Jan  1 00:00:17 laemmchen user.info kernel: b43-phy0: Broadcom 4306 WLAN found
Jan  1 00:00:17 laemmchen user.debug kernel: phy0: Selected rate control algorithm 'simple'
Jan  1 00:00:21 laemmchen user.info kernel: Linux video capture interface: v2.00
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: Initial auth_alg=0
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: authenticate with AP 00:11:d8:b7:e8:8c
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: RX authentication from 00:11:d8:b7:e8:8c (alg=0 transaction=2 status=0)
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: authenticated
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: associate with AP 00:11:d8:b7:e8:8c
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: RX AssocResp from 00:11:d8:b7:e8:8c (capab=0x411 status=0 aid=1)
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: associated
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
Jan  1 00:00:29 laemmchen user.debug kernel: wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
Jan  1 00:00:33 laemmchen authpriv.info dropbear[673]: Running in background
Jan  1 00:00:33 laemmchen user.info : sysctl: error: 'net.ipv6.conf.all.forwarding' is an unknown key
Jan  1 00:01:09 laemmchen authpriv.info dropbear[685]: Child connection from 192.168.17.115:52529
Jan  1 00:01:16 laemmchen authpriv.notice dropbear[685]: password auth succeeded for 'root' from 192.168.17.115:52529
Post #2
masc
18 Feb 2008, 23:36

hi!

well, it works at least with r10464. doing now some tests.

bye...masc.

The discussion might have continued from here.