Hi all,
my wrt350n v2 bricked by itself -.-
how can i debrick it?
This is the output in console:
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: RD-88F5181L-VOIP-GE LE
U-Boot 1.1.1 (Dec 12 2006 - 16:12:22) Marvell version: 1.7.3
DRAM CS[0] base 0x00000000 size 32MB
DRAM Total size 32MB
Flash: mvFlashInit base 0xff800000 devW 1 busW 1
Flash: flashStructGet manu 0xec id 0xe0
Flash: flashStructGet flash is supported.
FLASH: initFlashSecs TOP Sector Type
Flash: flashSecsInit main sector loop 0 - 127
[8192kB@ff800000] Flash: 8 MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
*** Warning - bad CRC, using default environment
Soc: MV88F5181 Rev 9
CPU: ARM926 (Rev 0) running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz
USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Thank you in advance for help
Workino
(Last edited by workino on 16 Feb 2008, 22:23)
i.e. install openwrt or not. Please tell me what did you do prior to get a brick?