OpenWrt Forum Archive

Topic: Increase safely syslogd -C16

The content of this topic has been archived on 12 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
Giammin
18 Feb 2008, 12:40

How much could i increase syslogd circular memory buffer??

i have an wrt54gs v1.1 with kamikaze 7.09

root@openwrt:~# df
Filesystem           1k-blocks      Used Available Use% Mounted on
none                     15256        48     15208   0% /tmp
/dev/mtdblock/4           6016      2180      3836  36% /jffs
mini_fo:/jffs             1216      1216         0 100% /
root@openwrt:~# cat /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  31244288 16093184 15151104        0  1150976  6393856
Swap:        0        0        0
MemTotal:        30512 kB
MemFree:         14796 kB
MemShared:           0 kB
Buffers:          1124 kB
Cached:           6244 kB
SwapCached:          0 kB
Active:           5048 kB
Inactive:         2348 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        30512 kB
LowFree:         14796 kB
SwapTotal:           0 kB
SwapFree:            0 kB
root@openwrt:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00020000 "cfe"
mtd1: 007a0000 00020000 "linux"
mtd2: 00141c00 00020000 "rootfs"
mtd3: 00020000 00020000 "nvram"
mtd4: 005e0000 00020000 "rootfs_data"

(Last edited by Giammin on 18 Feb 2008, 12:41)

The discussion might have continued from here.