How does one access the RSSI LEDs on the PS2/LS2? Which modules am I (probably) missing? OpenWRT r10517.
Topic: RSSI indicators on Ubiquiti PowerStation/LiteStation
The content of this topic has been archived on 26 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
I've used kmod-gpio package to access the leds at the backside of a NS2.
The procedure is the same as with a fonera (AR2315) and can be found here:
http://forum.openwrt.org/viewtopic.php?id=8912
and the pacakge:
The discussion might have continued from here.
Page 1 of 1