OpenWrt Forum Archive

Topic: Problem with whiterussian_rc3

The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
nagubk82
25 Feb 2008, 13:31

Hi,

     I am using whiterussian_rc3 in WRT54GL for porting NIST kernel AODV. The unit works fine with whiterussian_rc3 compared to other versions and kamikaze_7.09. I cross compiled the kernel AODV using whiterussian_rc3 mipsel utilities along with GPL code linksys  WRT54GL_v4.30.11_11_US kernel. The kernel AODV makefile is edited as follows

ifeq ($(TARGET),mipsel)
        CC := /home/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc
        LD := /home/openwrt/staging_dir_mipsel/bin/mipsel-linux-ld -r
        KPATH := /home/openwrt/build_mipsel/WRT54GL/release/src/linux/linux/include

        The cross compilation is successful. While inserting the kernel_aodv.o module file, the firmware hangs on reaching the add_timer(&aodv_timer) function. Have anyone faced this problem?? Please suggest me some solutions to overcome this issue.

Thanks and regards,
Nagarajan

Post #2
forum2008
25 Feb 2008, 13:32

tongue

The discussion might have continued from here.