Today i installed kamikaze from SVN and configured wireless to work in client mode in a WPA-PSK network, but wpa_supplicant outputs this msg:
WPA: CCMP is used, but EAPOL-Key descriptor version (1) is not 2.
Cumps
Topic: FON2200 Client mode (psk network)
The content of this topic has been archived on 22 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Page 1 of 1
Today i rebuilt wpasupplicant with madwifi support and now router connects and disconnects every second...
Edit
if i have two virtual wireless interfaces ath0 and ath1 and configure ath0 to work as ap and ath1 in sta it works (only if is configurated as wan port) .
Cumps
(Last edited by Gazetas on 29 Feb 2008, 22:57)
ok..
With manual configuration i'm connected to wireless network with psk.. but another problem was occurred! The device only "communicates" with the wireless network when was out of br-lan bridge..
The discussion might have continued from here.
Page 1 of 1