Hello,
im usin openwrt on asus wl-500gp:

Firmware      OpenWrt Kamikaze - With X-Wrt Extensions 7.09
Kernel          Linux 2.4.34 #45 Thu Feb 28 06:58:47 CST 2008
Device         ASUS WL-500g Premium
Board         Broadcom BCM4704 chip rev 9
Web mgt. console          Webif²
Version        r4034

im trying to setup Qos on it, in webif menu Network->QoS i have enabled and setup:
QoS Service    enabled
QoS Overhead Calculation    enabled
WAN Upload Speed    320 kilobits
WAN Download Speed    1312 kilobits

  Info  ADSL synchronization has been obtained
  Info  ADSL line is up (1312 kbit/s down | 320 kbit/s up)

But in menu Status->QoS i see:

Quality of Service Statistics
Incoming Traffic
Class     Packets     Bytes     
Priority     0     0     
Express     0     0     
Normal     0     0     
Bulk     0     0     
Total     0     0     
Outgoing Traffic
Class     Packets     Bytes     
Priority     0     0     
Express     0     0     
Normal     0     0     
Bulk     0     0     
Total     0     0     

Why there is all 0?  Before when i was using lan port as WLAN it was ok, but now i want QoS with DSL modem on interface ppp0. I completely dont know what to change.

Thanks for any help,
KooT

(Last edited by KooT on 2 Mar 2008, 19:47)

Hello,
I don't have the answer to your question sorry but when can you see these information:

I connect also via pppoe but I dont have this info.

EDIT: hmm I guess you are using a USB modem and not pppoe
Thanks.

(Last edited by Tex-Twil on 2 Mar 2008, 22:06)

Yes, it is USB modem: Thomson SpeedTouch 330 .